sPhenix code displayed by LXR master/​analysis/​SimpleTrackingAnalysis/​config.status	Source navigation Diff markup Identifier search General search
	Version: master Revert   Change

File indexing completed on 2025-08-03 08:15:33

 #! /bin/sh
 # Generated by configure.
 # Run this file to recreate the current configuration.
 # Compiler output produced by configure, useful for debugging
 # configure, is in config.log if it exists.
 
 debug=false
 ac_cs_recheck=false
 ac_cs_silent=false
 
 SHELL=${CONFIG_SHELL-/bin/sh}
 export SHELL
 ## -------------------- ##
 ## M4sh Initialization. ##
 ## -------------------- ##
 
 # Be more Bourne compatible
 DUALCASE=1; export DUALCASE # for MKS sh
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
   NULLCMD=:
   # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
 else
   case `(set -o) 2>/dev/null` in #(
   *posix*) :
     set -o posix ;; #(
   *) :
      ;;
 esac
 fi
 
 
 as_nl='
 '
 export as_nl
 # Printing a long string crashes Solaris 7 /usr/bin/printf.
 as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
 as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
 as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
 # Prefer a ksh shell builtin over an external printf program on Solaris,
 # but without wasting forks for bash or zsh.
 if test -z "$BASH_VERSION$ZSH_VERSION" \
     && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
   as_echo='print -r --'
   as_echo_n='print -rn --'
 elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
   as_echo='printf %s\n'
   as_echo_n='printf %s'
 else
   if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
     as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
     as_echo_n='/usr/ucb/echo -n'
   else
     as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
     as_echo_n_body='eval
       arg=$1;
       case $arg in #(
       *"$as_nl"*)
         expr "X$arg" : "X\\(.*\\)$as_nl";
         arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
       esac;
       expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
     '
     export as_echo_n_body
     as_echo_n='sh -c $as_echo_n_body as_echo'
   fi
   export as_echo_body
   as_echo='sh -c $as_echo_body as_echo'
 fi
 
 # The user is always right.
 if test "${PATH_SEPARATOR+set}" != set; then
   PATH_SEPARATOR=:
   (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
     (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
       PATH_SEPARATOR=';'
   }
 fi
 
 
 # IFS
 # We need space, tab and new line, in precisely that order.  Quoting is
 # there to prevent editors from complaining about space-tab.
 # (If _AS_PATH_WALK were called with IFS unset, it would disable word
 # splitting by setting IFS to empty value.)
 IFS=" ""        $as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
 as_myself=
 case $0 in #((
   *[\\/]* ) as_myself=$0 ;;
   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
   done
 IFS=$as_save_IFS
 
      ;;
 esac
 # We did not find ourselves, most probably we were run as `sh COMMAND'
 # in which case we are not to be found in the path.
 if test "x$as_myself" = x; then
   as_myself=$0
 fi
 if test ! -f "$as_myself"; then
   $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
   exit 1
 fi
 
 # Unset variables that we do not need and which cause bugs (e.g. in
 # pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
 # suppresses any "Segmentation fault" message there.  '((' could
 # trigger a bug in pdksh 5.2.14.
 for as_var in BASH_ENV ENV MAIL MAILPATH
 do eval test x\${$as_var+set} = xset \
   && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
 done
 PS1='$ '
 PS2='> '
 PS4='+ '
 
 # NLS nuisances.
 LC_ALL=C
 export LC_ALL
 LANGUAGE=C
 export LANGUAGE
 
 # CDPATH.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 
 # as_fn_error STATUS ERROR [LINENO LOG_FD]
 # ----------------------------------------
 # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
 # provided, also output the error to LOG_FD, referencing LINENO. Then exit the
 # script with STATUS, using 1 if that was 0.
 as_fn_error ()
 {
   as_status=$1; test $as_status -eq 0 && as_status=1
   if test "$4"; then
     as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
     $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
   fi
   $as_echo "$as_me: error: $2" >&2
   as_fn_exit $as_status
 } # as_fn_error
 
 
 # as_fn_set_status STATUS
 # -----------------------
 # Set $? to STATUS, without forking.
 as_fn_set_status ()
 {
   return $1
 } # as_fn_set_status
 
 # as_fn_exit STATUS
 # -----------------
 # Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
 as_fn_exit ()
 {
   set +e
   as_fn_set_status $1
   exit $1
 } # as_fn_exit
 
 # as_fn_unset VAR
 # ---------------
 # Portably unset VAR.
 as_fn_unset ()
 {
   { eval $1=; unset $1;}
 }
 as_unset=as_fn_unset
 # as_fn_append VAR VALUE
 # ----------------------
 # Append the text in VALUE to the end of the definition contained in VAR. Take
 # advantage of any shell optimizations that allow amortized linear growth over
 # repeated appends, instead of the typical quadratic growth present in naive
 # implementations.
 if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
   eval 'as_fn_append ()
   {
     eval $1+=\$2
   }'
 else
   as_fn_append ()
   {
     eval $1=\$$1\$2
   }
 fi # as_fn_append
 
 # as_fn_arith ARG...
 # ------------------
 # Perform arithmetic evaluation on the ARGs, and store the result in the
 # global $as_val. Take advantage of shells that can avoid forks. The arguments
 # must be portable across $(()) and expr.
 if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
   eval 'as_fn_arith ()
   {
     as_val=$(( $* ))
   }'
 else
   as_fn_arith ()
   {
     as_val=`expr "$@" || test $? -eq 1`
   }
 fi # as_fn_arith
 
 
 if expr a : '\(a\)' >/dev/null 2>&1 &&
    test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
 if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
 fi
 
 if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
   as_dirname=dirname
 else
   as_dirname=false
 fi
 
 as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
          X"$0" : 'X\(//\)$' \| \
          X"$0" : 'X\(/\)' \| . 2>/dev/null ||
 $as_echo X/"$0" |
     sed '/^.*\/\([^/][^/]*\)\/*$/{
             s//\1/
             q
           }
           /^X\/\(\/\/\)$/{
             s//\1/
             q
           }
           /^X\/\(\/\).*/{
             s//\1/
             q
           }
           s/.*/./; q'`
 
 # Avoid depending upon Character Ranges.
 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
 as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
 as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
 ECHO_C= ECHO_N= ECHO_T=
 case `echo -n x` in #(((((
 -n*)
   case `echo 'xy\c'` in
   *c*) ECHO_T=' ';;     # ECHO_T is single tab character.
   xy)  ECHO_C='\c';;
   *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
        ECHO_T=' ';;
   esac;;
 *)
   ECHO_N='-n';;
 esac
 
 rm -f conf$$ conf$$.exe conf$$.file
 if test -d conf$$.dir; then
   rm -f conf$$.dir/conf$$.file
 else
   rm -f conf$$.dir
   mkdir conf$$.dir 2>/dev/null
 fi
 if (echo >conf$$.file) 2>/dev/null; then
   if ln -s conf$$.file conf$$ 2>/dev/null; then
     as_ln_s='ln -s'
     # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
     # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
       as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln
   else
     as_ln_s='cp -pR'
   fi
 else
   as_ln_s='cp -pR'
 fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
 
 
 # as_fn_mkdir_p
 # -------------
 # Create "$as_dir" as a directory, including parents if necessary.
 as_fn_mkdir_p ()
 {
 
   case $as_dir in #(
   -*) as_dir=./$as_dir;;
   esac
   test -d "$as_dir" || eval $as_mkdir_p || {
     as_dirs=
     while :; do
       case $as_dir in #(
       *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
       *) as_qdir=$as_dir;;
       esac
       as_dirs="'$as_qdir' $as_dirs"
       as_dir=`$as_dirname -- "$as_dir" ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
          X"$as_dir" : 'X\(//\)[^/]' \| \
          X"$as_dir" : 'X\(//\)$' \| \
          X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
 $as_echo X"$as_dir" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
             s//\1/
             q
           }
           /^X\(\/\/\)[^/].*/{
             s//\1/
             q
           }
           /^X\(\/\/\)$/{
             s//\1/
             q
           }
           /^X\(\/\).*/{
             s//\1/
             q
           }
           s/.*/./; q'`
       test -d "$as_dir" && break
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
   } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
 
 
 } # as_fn_mkdir_p
 if mkdir -p . 2>/dev/null; then
   as_mkdir_p='mkdir -p "$as_dir"'
 else
   test -d ./-p && rmdir ./-p
   as_mkdir_p=false
 fi
 
 
 # as_fn_executable_p FILE
 # -----------------------
 # Test if FILE is an executable regular file.
 as_fn_executable_p ()
 {
   test -f "$1" && test -x "$1"
 } # as_fn_executable_p
 as_test_x='test -x'
 as_executable_p=as_fn_executable_p
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 
 # Sed expression to map a string onto a valid variable name.
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
 exec 6>&1
 ## ----------------------------------- ##
 ## Main body of $CONFIG_STATUS script. ##
 ## ----------------------------------- ##
 # Save the log message, to keep $0 and so on meaningful, and to
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
 This file was extended by $as_me, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
   CONFIG_LINKS    = $CONFIG_LINKS
   CONFIG_COMMANDS = $CONFIG_COMMANDS
   $ $0 $@
 
 on `(hostname || uname -n) 2>/dev/null | sed 1q`
 "
 
 # Files that config.status was made for.
 config_files=" Makefile"
 config_commands=" depfiles libtool"
 
 ac_cs_usage="\
 \`$as_me' instantiates files and other configuration actions
 from templates according to the current configuration.  Unless the files
 and actions are specified as TAGs, all are instantiated by default.
 
 Usage: $0 [OPTION]... [TAG]...
 
   -h, --help       print this help, then exit
   -V, --version    print version number and configuration settings, then exit
       --config     print configuration, then exit
   -q, --quiet, --silent
                    do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
       --file=FILE[:TEMPLATE]
                    instantiate the configuration file FILE
 
 Configuration files:
 $config_files
 
 Configuration commands:
 $config_commands
 
 Report bugs to the package provider."
 
 ac_cs_config=""
 ac_cs_version="\
 config.status
 configured by ./configure, generated by GNU Autoconf 2.69,
   with options \"$ac_cs_config\"
 
 Copyright (C) 2012 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
 ac_pwd='/sphenix/u/weihuma/analysis/SimpleTrackingAnalysis'
 srcdir='.'
 INSTALL='/usr/bin/install -c'
 MKDIR_P='/usr/bin/mkdir -p'
 AWK='gawk'
 test -n "$AWK" || AWK=awk
 # The default lists apply if the user does not specify any file.
 ac_need_defaults=:
 while test $# != 0
 do
   case $1 in
   --*=?*)
     ac_option=`expr "X$1" : 'X\([^=]*\)='`
     ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
     ac_shift=:
     ;;
   --*=)
     ac_option=`expr "X$1" : 'X\([^=]*\)='`
     ac_optarg=
     ac_shift=:
     ;;
   *)
     ac_option=$1
     ac_optarg=$2
     ac_shift=shift
     ;;
   esac
 
   case $ac_option in
   # Handling of the options.
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
     ac_cs_recheck=: ;;
   --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
     $as_echo "$ac_cs_version"; exit ;;
   --config | --confi | --conf | --con | --co | --c )
     $as_echo "$ac_cs_config"; exit ;;
   --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
     case $ac_optarg in
     *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
     '') as_fn_error $? "missing file argument" ;;
     esac
     as_fn_append CONFIG_FILES " '$ac_optarg'"
     ac_need_defaults=false;;
   --he | --h |  --help | --hel | -h )
     $as_echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
     ac_cs_silent=: ;;
 
   # This is an error.
   -*) as_fn_error $? "unrecognized option: \`$1'
 Try \`$0 --help' for more information." ;;
 
   *) as_fn_append ac_config_targets " $1"
      ac_need_defaults=false ;;
 
   esac
   shift
 done
 
 ac_configure_extra_args=
 
 if $ac_cs_silent; then
   exec 6>/dev/null
   ac_configure_extra_args="$ac_configure_extra_args --silent"
 fi
 
 if $ac_cs_recheck; then
   set X /bin/sh './configure'  $ac_configure_extra_args --no-create --no-recursion
   shift
   $as_echo "running CONFIG_SHELL=/bin/sh $*" >&6
   CONFIG_SHELL='/bin/sh'
   export CONFIG_SHELL
   exec "$@"
 fi
 
 exec 5>>config.log
 {
   echo
   sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
 ## Running $as_me. ##
 _ASBOX
   $as_echo "$ac_log"
 } >&5
 
 #
 # INIT-COMMANDS
 #
 AMDEP_TRUE="" ac_aux_dir="."
 
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
 double_quote_subst='s/\(["`\\]\)/\\\1/g'
 delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 enable_static='no'
 macro_version='2.4.2'
 macro_revision='1.3337'
 enable_shared='yes'
 pic_mode='default'
 enable_fast_install='needless'
 SHELL='/bin/sh'
 ECHO='printf %s\n'
 PATH_SEPARATOR=':'
 host_alias=''
 host='x86_64-unknown-linux-gnu'
 host_os='linux-gnu'
 build_alias=''
 build='x86_64-unknown-linux-gnu'
 build_os='linux-gnu'
 SED='/usr/bin/sed'
 Xsed='/usr/bin/sed -e 1s/^X//'
 GREP='/usr/bin/grep'
 EGREP='/usr/bin/grep -E'
 FGREP='/usr/bin/grep -F'
 LD='/usr/bin/ld -m elf_x86_64'
 NM='/usr/bin/nm -B'
 LN_S='ln -s'
 max_cmd_len='1572864'
 ac_objext='o'
 exeext=''
 lt_unset='unset'
 lt_SP2NL='tr \040 \012'
 lt_NL2SP='tr \015\012 \040\040'
 lt_cv_to_host_file_cmd='func_convert_file_noop'
 lt_cv_to_tool_file_cmd='func_convert_file_noop'
 reload_flag=' -r'
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
 OBJDUMP='objdump'
 deplibs_check_method='pass_all'
 file_magic_cmd='$MAGIC_CMD'
 file_magic_glob=''
 want_nocaseglob='no'
 DLLTOOL='false'
 sharedlib_from_linklib_cmd='printf %s\n'
 AR='ar'
 AR_FLAGS='cru'
 archiver_list_spec='@'
 STRIP='strip'
 RANLIB='ranlib'
 old_postinstall_cmds='chmod 644 $oldlib~$RANLIB $tool_oldlib'
 old_postuninstall_cmds=''
 old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $tool_oldlib'
 lock_old_archive_extraction='no'
 CC='gcc'
 CFLAGS='-g -O2'
 compiler='g++'
 GCC='yes'
 lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[       ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[         ][      ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'' | sed '\''/ __gnu_lto/d'\'''
 lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\'''
 lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\)[ ]*$/  {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/  {"\2", (void *) \&\2},/p'\'''
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\)[ ]*$/  {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/  {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/  {"lib\2", (void *) \&\2},/p'\'''
 nm_file_list_spec='@'
 lt_sysroot=''
 objdir='.libs'
 MAGIC_CMD='file'
 lt_prog_compiler_no_builtin_flag=' -fno-builtin'
 lt_prog_compiler_pic=' -fPIC -DPIC'
 lt_prog_compiler_wl='-Wl,'
 lt_prog_compiler_static=''
 lt_cv_prog_compiler_c_o='yes'
 need_locks='no'
 MANIFEST_TOOL=':'
 DSYMUTIL=''
 NMEDIT=''
 LIPO=''
 OTOOL=''
 OTOOL64=''
 libext='a'
 shrext_cmds='.so'
 extract_expsyms_cmds=''
 archive_cmds_need_lc='no'
 enable_shared_with_static_runtimes='no'
 export_dynamic_flag_spec='${wl}--export-dynamic'
 whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
 compiler_needs_object='no'
 old_archive_from_new_cmds=''
 old_archive_from_expsyms_cmds=''
 archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
             cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
             echo "local: *; };" >> $output_objdir/$libname.ver~
             $CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
 module_cmds=''
 module_expsym_cmds=''
 with_gnu_ld='yes'
 allow_undefined_flag=''
 no_undefined_flag=''
 hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
 hardcode_libdir_separator=''
 hardcode_direct='no'
 hardcode_direct_absolute='no'
 hardcode_minus_L='no'
 hardcode_shlibpath_var='unsupported'
 hardcode_automatic='no'
 inherit_rpath='no'
 link_all_deplibs='unknown'
 always_export_symbols='no'
 export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
 exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
 include_expsyms=''
 prelink_cmds=''
 postlink_cmds=''
 file_list_spec=''
 variables_saved_for_relink='PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH'
 need_lib_prefix='no'
 need_version='no'
 version_type='linux'
 runpath_var='LD_RUN_PATH'
 shlibpath_var='LD_LIBRARY_PATH'
 shlibpath_overrides_runpath='yes'
 libname_spec='lib$name'
 library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
 soname_spec='${libname}${release}${shared_ext}$major'
 install_override_mode=''
 postinstall_cmds=''
 postuninstall_cmds=''
 finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
 finish_eval=''
 hardcode_into_libs='yes'
 sys_lib_search_path_spec='/usr/lib/gcc/x86_64-redhat-linux/4.8.5 /usr/lib64 /lib64 '
 sys_lib_dlsearch_path_spec='/lib64 /usr/lib64 /lib /usr/lib /usr/lib/atlas-sse3 /usr/lib64/atlas /usr/lib64/dyninst /usr/lib/iscsi /usr/lib64/iscsi /usr/lib64/llvm /usr/lib/mysql /usr/lib64/mysql /usr/lib/qt-3.3/lib /usr/lib64/qt-3.3/lib /usr/lib/tcl8.5 /usr/lib64/tcl8.5 '
 hardcode_action='immediate'
 enable_dlopen='unknown'
 enable_dlopen_self='unknown'
 enable_dlopen_self_static='unknown'
 old_striplib='strip --strip-debug'
 striplib='strip --strip-unneeded'
 compiler_lib_search_dirs=''
 predep_objects=''
 postdep_objects=''
 predeps=''
 postdeps=''
 compiler_lib_search_path=''
 LD_CXX='/usr/bin/ld -m elf_x86_64'
 reload_flag_CXX=' -r'
 reload_cmds_CXX='$LD$reload_flag -o $output$reload_objs'
 old_archive_cmds_CXX='$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $tool_oldlib'
 compiler_CXX='g++'
 GCC_CXX='yes'
 lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
 lt_prog_compiler_pic_CXX=' -fPIC -DPIC'
 lt_prog_compiler_wl_CXX='-Wl,'
 lt_prog_compiler_static_CXX=''
 lt_cv_prog_compiler_c_o_CXX='yes'
 archive_cmds_need_lc_CXX='no'
 enable_shared_with_static_runtimes_CXX='no'
 export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
 whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
 compiler_needs_object_CXX='no'
 old_archive_from_new_cmds_CXX=''
 old_archive_from_expsyms_cmds_CXX=''
 archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
 archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 module_cmds_CXX=''
 module_expsym_cmds_CXX=''
 with_gnu_ld_CXX='yes'
 allow_undefined_flag_CXX=''
 no_undefined_flag_CXX=''
 hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
 hardcode_libdir_separator_CXX=''
 hardcode_direct_CXX='no'
 hardcode_direct_absolute_CXX='no'
 hardcode_minus_L_CXX='no'
 hardcode_shlibpath_var_CXX='unsupported'
 hardcode_automatic_CXX='no'
 inherit_rpath_CXX='no'
 link_all_deplibs_CXX='unknown'
 always_export_symbols_CXX='no'
 export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
 exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
 include_expsyms_CXX=''
 prelink_cmds_CXX=''
 postlink_cmds_CXX=''
 file_list_spec_CXX=''
 hardcode_action_CXX='immediate'
 compiler_lib_search_dirs_CXX='/usr/lib/gcc/x86_64-redhat-linux/4.8.5 /usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64 /lib/../lib64 /usr/lib/../lib64 /usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../..'
 predep_objects_CXX='/usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64/crti.o /usr/lib/gcc/x86_64-redhat-linux/4.8.5/crtbeginS.o'
 postdep_objects_CXX='/usr/lib/gcc/x86_64-redhat-linux/4.8.5/crtendS.o /usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64/crtn.o'
 predeps_CXX=''
 postdeps_CXX='-lstdc++ -lm -lgcc_s -lc -lgcc_s'
 compiler_lib_search_path_CXX='-L/usr/lib/gcc/x86_64-redhat-linux/4.8.5 -L/usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../..'
 
 LTCC='gcc'
 LTCFLAGS='-g -O2'
 compiler='gcc'
 
 # A function that is used when there is no print builtin or printf.
 func_fallback_echo ()
 {
   eval 'cat <<_LTECHO_EOF
 $1
 _LTECHO_EOF'
 }
 
 # Quote evaled strings.
 for var in SHELL ECHO PATH_SEPARATOR SED GREP EGREP FGREP LD NM LN_S lt_SP2NL lt_NL2SP reload_flag OBJDUMP deplibs_check_method file_magic_cmd file_magic_glob want_nocaseglob DLLTOOL sharedlib_from_linklib_cmd AR AR_FLAGS archiver_list_spec STRIP RANLIB CC CFLAGS compiler lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl lt_cv_sys_global_symbol_to_c_name_address lt_cv_sys_global_symbol_to_c_name_address_lib_prefix nm_file_list_spec lt_prog_compiler_no_builtin_flag lt_prog_compiler_pic lt_prog_compiler_wl lt_prog_compiler_static lt_cv_prog_compiler_c_o need_locks MANIFEST_TOOL DSYMUTIL NMEDIT LIPO OTOOL OTOOL64 shrext_cmds export_dynamic_flag_spec whole_archive_flag_spec compiler_needs_object with_gnu_ld allow_undefined_flag no_undefined_flag hardcode_libdir_flag_spec hardcode_libdir_separator exclude_expsyms include_expsyms file_list_spec variables_saved_for_relink libname_spec library_names_spec soname_spec install_override_mode finish_eval old_striplib striplib compiler_lib_search_dirs predep_objects postdep_objects predeps postdeps compiler_lib_search_path LD_CXX reload_flag_CXX compiler_CXX lt_prog_compiler_no_builtin_flag_CXX lt_prog_compiler_pic_CXX lt_prog_compiler_wl_CXX lt_prog_compiler_static_CXX lt_cv_prog_compiler_c_o_CXX export_dynamic_flag_spec_CXX whole_archive_flag_spec_CXX compiler_needs_object_CXX with_gnu_ld_CXX allow_undefined_flag_CXX no_undefined_flag_CXX hardcode_libdir_flag_spec_CXX hardcode_libdir_separator_CXX exclude_expsyms_CXX include_expsyms_CXX file_list_spec_CXX compiler_lib_search_dirs_CXX predep_objects_CXX postdep_objects_CXX predeps_CXX postdeps_CXX compiler_lib_search_path_CXX; do
     case `eval \\$ECHO \\""\\$$var"\\"` in
     *[\\\`\"\$]*)
       eval "lt_$var=\\\"\`\$ECHO \"\$$var\" | \$SED \"\$sed_quote_subst\"\`\\\""
       ;;
     *)
       eval "lt_$var=\\\"\$$var\\\""
       ;;
     esac
 done
 
 # Double-quote double-evaled strings.
 for var in reload_cmds old_postinstall_cmds old_postuninstall_cmds old_archive_cmds extract_expsyms_cmds old_archive_from_new_cmds old_archive_from_expsyms_cmds archive_cmds archive_expsym_cmds module_cmds module_expsym_cmds export_symbols_cmds prelink_cmds postlink_cmds postinstall_cmds postuninstall_cmds finish_cmds sys_lib_search_path_spec sys_lib_dlsearch_path_spec reload_cmds_CXX old_archive_cmds_CXX old_archive_from_new_cmds_CXX old_archive_from_expsyms_cmds_CXX archive_cmds_CXX archive_expsym_cmds_CXX module_cmds_CXX module_expsym_cmds_CXX export_symbols_cmds_CXX prelink_cmds_CXX postlink_cmds_CXX; do
     case `eval \\$ECHO \\""\\$$var"\\"` in
     *[\\\`\"\$]*)
       eval "lt_$var=\\\"\`\$ECHO \"\$$var\" | \$SED -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
       ;;
     *)
       eval "lt_$var=\\\"\$$var\\\""
       ;;
     esac
 done
 
 ac_aux_dir='.'
 xsi_shell='yes'
 lt_shell_append='yes'
 
 # See if we are running on zsh, and set the options which allow our
 # commands through without removal of \ escapes INIT.
 if test -n "${ZSH_VERSION+set}" ; then
    setopt NO_GLOB_SUBST
 fi
 
 
     PACKAGE='g4picoDst'
     VERSION='1.00'
     TIMESTAMP=''
     RM='rm -f'
     ofile='libtool'
 
 
 
 
 
 
 
 # Handling of arguments.
 for ac_config_target in $ac_config_targets
 do
   case $ac_config_target in
     "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
     "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
 
   *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
 done
 
 
 # If the user did not use the arguments to specify the items to instantiate,
 # then the envvar interface is used.  Set only those that are not.
 # We use the long form for the default assignment because of an extremely
 # bizarre bug on SunOS 4.1.3.
 if $ac_need_defaults; then
   test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
   test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
 fi
 
 # Have a temporary directory for convenience.  Make it in the build tree
 # simply because there is no reason against having it here, and in addition,
 # creating and moving files from /tmp can sometimes cause problems.
 # Hook for its removal unless debugging.
 # Note that there is a small window in which the directory will not be cleaned:
 # after its creation but before its name has been assigned to `$tmp'.
 $debug ||
 {
   tmp= ac_tmp=
   trap 'exit_status=$?
   : "${ac_tmp:=$tmp}"
   { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
 ' 0
   trap 'as_fn_exit 1' 1 2 13 15
 }
 # Create a (secure) tmp directory for tmp files.
 
 {
   tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
   test -d "$tmp"
 }  ||
 {
   tmp=./conf$$-$RANDOM
   (umask 077 && mkdir "$tmp")
 } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
 ac_tmp=$tmp
 
 # Set up the scripts for CONFIG_FILES section.
 # No need to generate them if there are no CONFIG_FILES.
 # This happens for instance with `./config.status config.h'.
 if test -n "$CONFIG_FILES"; then
 
 
 ac_cr=`echo X | tr X '\015'`
 # On cygwin, bash can eat \r inside `` if the user requested igncr.
 # But we know of no other shell where ac_cr would be empty at this
 # point, so we can use a bashism as a fallback.
 if test "x$ac_cr" = x; then
   eval ac_cr=\$\'\\r\'
 fi
 ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
 if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
   ac_cs_awk_cr='\\r'
 else
   ac_cs_awk_cr=$ac_cr
 fi
 
 echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
 cat >>"$ac_tmp/subs1.awk" <<\_ACAWK &&
 S["am__EXEEXT_FALSE"]=""
 S["am__EXEEXT_TRUE"]="#"
 S["LTLIBOBJS"]=""
 S["LIBOBJS"]=""
 S["ROOTLIBS"]="-L/afs/rhic.bnl.gov/sphenix/new/root/lib -lCore -lCint -lRIO -lNet -lHist -lGraf -lGraf3d -lGpad -lTree -lRint -lPostscript -lMatrix -lPhysics -lMat"\
 "hCore -lThread -pthread -lm -ldl -rdynamic"
 S["CXXCPP"]="g++ -E"
 S["CPP"]="gcc -E"
 S["OTOOL64"]=""
 S["OTOOL"]=""
 S["LIPO"]=""
 S["NMEDIT"]=""
 S["DSYMUTIL"]=""
 S["MANIFEST_TOOL"]=":"
 S["RANLIB"]="ranlib"
 S["ac_ct_AR"]="ar"
 S["AR"]="ar"
 S["DLLTOOL"]="false"
 S["OBJDUMP"]="objdump"
 S["LN_S"]="ln -s"
 S["NM"]="/usr/bin/nm -B"
 S["ac_ct_DUMPBIN"]=""
 S["DUMPBIN"]=""
 S["LD"]="/usr/bin/ld -m elf_x86_64"
 S["FGREP"]="/usr/bin/grep -F"
 S["EGREP"]="/usr/bin/grep -E"
 S["GREP"]="/usr/bin/grep"
 S["SED"]="/usr/bin/sed"
 S["am__fastdepCC_FALSE"]="#"
 S["am__fastdepCC_TRUE"]=""
 S["CCDEPMODE"]="depmode=gcc3"
 S["ac_ct_CC"]="gcc"
 S["CFLAGS"]="-g -O2"
 S["CC"]="gcc"
 S["host_os"]="linux-gnu"
 S["host_vendor"]="unknown"
 S["host_cpu"]="x86_64"
 S["host"]="x86_64-unknown-linux-gnu"
 S["build_os"]="linux-gnu"
 S["build_vendor"]="unknown"
 S["build_cpu"]="x86_64"
 S["build"]="x86_64-unknown-linux-gnu"
 S["LIBTOOL"]="$(SHELL) $(top_builddir)/libtool"
 S["am__fastdepCXX_FALSE"]="#"
 S["am__fastdepCXX_TRUE"]=""
 S["CXXDEPMODE"]="depmode=gcc3"
 S["am__nodep"]="_no"
 S["AMDEPBACKSLASH"]="\\"
 S["AMDEP_FALSE"]="#"
 S["AMDEP_TRUE"]=""
 S["am__quote"]=""
 S["am__include"]="include"
 S["DEPDIR"]=".deps"
 S["OBJEXT"]="o"
 S["EXEEXT"]=""
 S["ac_ct_CXX"]="g++"
 S["CPPFLAGS"]=""
 S["LDFLAGS"]="-Wl,--enable-new-dtags"
 S["CXXFLAGS"]="-g -O2 -std=c++11 -Wall -Werror"
 S["CXX"]="g++"
 S["AM_BACKSLASH"]="\\"
 S["AM_DEFAULT_VERBOSITY"]="1"
 S["AM_DEFAULT_V"]="$(AM_DEFAULT_VERBOSITY)"
 S["AM_V"]="$(V)"
 S["am__untar"]="$${TAR-tar} xf -"
 S["am__tar"]="$${TAR-tar} chof - \"$$tardir\""
 S["AMTAR"]="$${TAR-tar}"
 S["am__leading_dot"]="."
 S["SET_MAKE"]=""
 S["AWK"]="gawk"
 S["mkdir_p"]="$(MKDIR_P)"
 S["MKDIR_P"]="/usr/bin/mkdir -p"
 S["INSTALL_STRIP_PROGRAM"]="$(install_sh) -c -s"
 S["STRIP"]="strip"
 S["install_sh"]="${SHELL} /sphenix/u/weihuma/analysis/SimpleTrackingAnalysis/install-sh"
 S["MAKEINFO"]="${SHELL} /sphenix/u/weihuma/analysis/SimpleTrackingAnalysis/missing makeinfo"
 S["AUTOHEADER"]="${SHELL} /sphenix/u/weihuma/analysis/SimpleTrackingAnalysis/missing autoheader"
 S["AUTOMAKE"]="${SHELL} /sphenix/u/weihuma/analysis/SimpleTrackingAnalysis/missing automake-1.13"
 S["AUTOCONF"]="${SHELL} /sphenix/u/weihuma/analysis/SimpleTrackingAnalysis/missing autoconf"
 S["ACLOCAL"]="${SHELL} /sphenix/u/weihuma/analysis/SimpleTrackingAnalysis/missing aclocal-1.13"
 S["VERSION"]="1.00"
 S["PACKAGE"]="g4picoDst"
 S["CYGPATH_W"]="echo"
 S["am__isrc"]=""
 S["INSTALL_DATA"]="${INSTALL} -m 644"
 S["INSTALL_SCRIPT"]="${INSTALL}"
 S["INSTALL_PROGRAM"]="${INSTALL}"
 S["target_alias"]=""
 S["host_alias"]=""
 S["build_alias"]=""
 S["LIBS"]=""
 S["ECHO_T"]=""
 S["ECHO_N"]="-n"
 S["ECHO_C"]=""
 S["DEFS"]="-DPACKAGE_NAME=\\\"\\\" -DPACKAGE_TARNAME=\\\"\\\" -DPACKAGE_VERSION=\\\"\\\" -DPACKAGE_STRING=\\\"\\\" -DPACKAGE_BUGREPORT=\\\"\\\" -DPACKAGE_URL=\\\"\\\" -DPACKAGE=\\\"g4pi"\
 "coDst\\\" -DVERSION=\\\"1.00\\\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ST"\
 "RINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\\\".libs/\\\""
 S["mandir"]="${datarootdir}/man"
 S["localedir"]="${datarootdir}/locale"
 S["libdir"]="${exec_prefix}/lib"
 S["psdir"]="${docdir}"
 S["pdfdir"]="${docdir}"
 S["dvidir"]="${docdir}"
 S["htmldir"]="${docdir}"
 S["infodir"]="${datarootdir}/info"
 S["docdir"]="${datarootdir}/doc/${PACKAGE}"
 S["oldincludedir"]="/usr/include"
 S["includedir"]="${prefix}/include"
 S["localstatedir"]="${prefix}/var"
 S["sharedstatedir"]="${prefix}/com"
 S["sysconfdir"]="${prefix}/etc"
 S["datadir"]="${datarootdir}"
 S["datarootdir"]="${prefix}/share"
 S["libexecdir"]="${exec_prefix}/libexec"
 S["sbindir"]="${exec_prefix}/sbin"
 S["bindir"]="${exec_prefix}/bin"
 S["program_transform_name"]="s,x,x,"
 S["prefix"]="/usr/local"
 S["exec_prefix"]="${prefix}"
 S["PACKAGE_URL"]=""
 S["PACKAGE_BUGREPORT"]=""
 S["PACKAGE_STRING"]=""
 S["PACKAGE_VERSION"]=""
 S["PACKAGE_TARNAME"]=""
 S["PACKAGE_NAME"]=""
 S["PATH_SEPARATOR"]=":"
 S["SHELL"]="/bin/sh"
 _ACAWK
 cat >>"$ac_tmp/subs1.awk" <<_ACAWK &&
   for (key in S) S_is_set[key] = 1
   FS = ""
 
 }
 {
   line = $ 0
   nfields = split(line, field, "@")
   substed = 0
   len = length(field[1])
   for (i = 2; i < nfields; i++) {
     key = field[i]
     keylen = length(key)
     if (S_is_set[key]) {
       value = S[key]
       line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
       len += length(value) + length(field[++i])
       substed = 1
     } else
       len += 1 + keylen
   }
 
   print line
 }
 
 _ACAWK
 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
   sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
 else
   cat
 fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
   || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
 fi # test -n "$CONFIG_FILES"
 
 
 eval set X "  :F $CONFIG_FILES      :C $CONFIG_COMMANDS"
 shift
 for ac_tag
 do
   case $ac_tag in
   :[FHLC]) ac_mode=$ac_tag; continue;;
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
   :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
   esac
   ac_save_IFS=$IFS
   IFS=:
   set x $ac_tag
   IFS=$ac_save_IFS
   shift
   ac_file=$1
   shift
 
   case $ac_mode in
   :L) ac_source=$1;;
   :[FH])
     ac_file_inputs=
     for ac_f
     do
       case $ac_f in
       -) ac_f="$ac_tmp/stdin";;
       *) # Look for the file first in the build tree, then in the source tree
          # (if the path is not absolute).  The absolute path cannot be DOS-style,
          # because $ac_f cannot contain `:'.
          test -f "$ac_f" ||
            case $ac_f in
            [\\/$]*) false;;
            *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
            esac ||
            as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
       esac
       case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
       as_fn_append ac_file_inputs " '$ac_f'"
     done
 
     # Let's still pretend it is `configure' which instantiates (i.e., don't
     # use $as_me), people would be surprised to read:
     #    /* config.h.  Generated by config.status.  */
     configure_input='Generated from '`
           $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
         `' by configure.'
     if test x"$ac_file" != x-; then
       configure_input="$ac_file.  $configure_input"
       { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
 $as_echo "$as_me: creating $ac_file" >&6;}
     fi
     # Neutralize special characters interpreted by sed in replacement strings.
     case $configure_input in #(
     *\&* | *\|* | *\\* )
        ac_sed_conf_input=`$as_echo "$configure_input" |
        sed 's/[\\\\&|]/\\\\&/g'`;; #(
     *) ac_sed_conf_input=$configure_input;;
     esac
 
     case $ac_tag in
     *:-:* | *:-) cat >"$ac_tmp/stdin" \
       || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
     esac
     ;;
   esac
 
   ac_dir=`$as_dirname -- "$ac_file" ||
 $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
          X"$ac_file" : 'X\(//\)[^/]' \| \
          X"$ac_file" : 'X\(//\)$' \| \
          X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
 $as_echo X"$ac_file" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
             s//\1/
             q
           }
           /^X\(\/\/\)[^/].*/{
             s//\1/
             q
           }
           /^X\(\/\/\)$/{
             s//\1/
             q
           }
           /^X\(\/\).*/{
             s//\1/
             q
           }
           s/.*/./; q'`
   as_dir="$ac_dir"; as_fn_mkdir_p
   ac_builddir=.
 
 case "$ac_dir" in
 .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
 *)
   ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
   # A ".." for each directory in $ac_dir_suffix.
   ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
   case $ac_top_builddir_sub in
   "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
   *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
   esac ;;
 esac
 ac_abs_top_builddir=$ac_pwd
 ac_abs_builddir=$ac_pwd$ac_dir_suffix
 # for backward compatibility:
 ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
   .)  # We are building in place.
     ac_srcdir=.
     ac_top_srcdir=$ac_top_builddir_sub
     ac_abs_top_srcdir=$ac_pwd ;;
   [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
     ac_top_srcdir=$srcdir
     ac_abs_top_srcdir=$srcdir ;;
   *) # Relative name.
     ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
     ac_top_srcdir=$ac_top_build_prefix$srcdir
     ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
 ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
 
   case $ac_mode in
   :F)
   #
   # CONFIG_FILE
   #
 
   case $INSTALL in
   [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
   *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
   esac
   ac_MKDIR_P=$MKDIR_P
   case $MKDIR_P in
   [\\/$]* | ?:[\\/]* ) ;;
   */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
   esac
 # If the template does not know about datarootdir, expand it.
 # FIXME: This hack should be removed a few years after 2.60.
 ac_datarootdir_hack=; ac_datarootdir_seen=
 ac_sed_dataroot='
 /datarootdir/ {
   p
   q
 }
 /@datadir@/p
 /@docdir@/p
 /@infodir@/p
 /@localedir@/p
 /@mandir@/p'
 case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
 *datarootdir*) ac_datarootdir_seen=yes;;
 *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
   ac_datarootdir_hack='
   s&@datadir@&${datarootdir}&g
   s&@docdir@&${datarootdir}/doc/${PACKAGE}&g
   s&@infodir@&${datarootdir}/info&g
   s&@localedir@&${datarootdir}/locale&g
   s&@mandir@&${datarootdir}/man&g
   s&\${datarootdir}&${prefix}/share&g' ;;
 esac
 ac_sed_extra="/^[        ]*VPATH[        ]*=[    ]*/{
 h
 s///
 s/^/:/
 s/[      ]*$/:/
 s/:\$(srcdir):/:/g
 s/:\${srcdir}:/:/g
 s/:@srcdir@:/:/g
 s/^:*//
 s/:*$//
 x
 s/\(=[   ]*\).*/\1/
 G
 s/\n//
 s/^[^=]*=[       ]*$//
 }
 
 :t
 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
 s|@configure_input@|$ac_sed_conf_input|;t t
 s&@top_builddir@&$ac_top_builddir_sub&;t t
 s&@top_build_prefix@&$ac_top_build_prefix&;t t
 s&@srcdir@&$ac_srcdir&;t t
 s&@abs_srcdir@&$ac_abs_srcdir&;t t
 s&@top_srcdir@&$ac_top_srcdir&;t t
 s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
 s&@builddir@&$ac_builddir&;t t
 s&@abs_builddir@&$ac_abs_builddir&;t t
 s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
 s&@INSTALL@&$ac_INSTALL&;t t
 s&@MKDIR_P@&$ac_MKDIR_P&;t t
 $ac_datarootdir_hack
 "
 eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
   >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
 
 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
   { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
   { ac_out=`sed -n '/^[  ]*datarootdir[  ]*:*=/p' \
       "$ac_tmp/out"`; test -z "$ac_out"; } &&
   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined" >&5
 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined" >&2;}
 
   rm -f "$ac_tmp/stdin"
   case $ac_file in
   -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
   *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
   esac \
   || as_fn_error $? "could not create $ac_file" "$LINENO" 5
  ;;
 
 
   :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
 $as_echo "$as_me: executing $ac_file commands" >&6;}
  ;;
   esac
 
 
   case $ac_file$ac_mode in
     "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
   # Older Autoconf quotes --file arguments for eval, but not when files
   # are listed without --file.  Let's play safe and only enable the eval
   # if we detect the quoting.
   case $CONFIG_FILES in
   *\'*) eval set x "$CONFIG_FILES" ;;
   *)   set x $CONFIG_FILES ;;
   esac
   shift
   for mf
   do
     # Strip MF so we end up with the name of the file.
     mf=`echo "$mf" | sed -e 's/:.*$//'`
     # Check whether this is an Automake generated Makefile or not.
     # We used to match only the files named 'Makefile.in', but
     # some people rename them; so instead we look at the file content.
     # Grep'ing the first line is not enough: some people post-process
     # each Makefile.in and add a new line on top of each file to say so.
     # Grep'ing the whole file is not good either: AIX grep has a line
     # limit of 2048, but all sed's we know have understand at least 4000.
     if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
       dirpart=`$as_dirname -- "$mf" ||
 $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
          X"$mf" : 'X\(//\)[^/]' \| \
          X"$mf" : 'X\(//\)$' \| \
          X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
 $as_echo X"$mf" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
             s//\1/
             q
           }
           /^X\(\/\/\)[^/].*/{
             s//\1/
             q
           }
           /^X\(\/\/\)$/{
             s//\1/
             q
           }
           /^X\(\/\).*/{
             s//\1/
             q
           }
           s/.*/./; q'`
     else
       continue
     fi
     # Extract the definition of DEPDIR, am__include, and am__quote
     # from the Makefile without running 'make'.
     DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
     test -z "$DEPDIR" && continue
     am__include=`sed -n 's/^am__include = //p' < "$mf"`
     test -z "$am__include" && continue
     am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
     # Find all dependency output files, they are included files with
     # $(DEPDIR) in their names.  We invoke sed twice because it is the
     # simplest approach to changing $(DEPDIR) to its actual value in the
     # expansion.
     for file in `sed -n "
       s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
          sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
       # Make sure the directory exists.
       test -f "$dirpart/$file" && continue
       fdir=`$as_dirname -- "$file" ||
 $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
          X"$file" : 'X\(//\)[^/]' \| \
          X"$file" : 'X\(//\)$' \| \
          X"$file" : 'X\(/\)' \| . 2>/dev/null ||
 $as_echo X"$file" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
             s//\1/
             q
           }
           /^X\(\/\/\)[^/].*/{
             s//\1/
             q
           }
           /^X\(\/\/\)$/{
             s//\1/
             q
           }
           /^X\(\/\).*/{
             s//\1/
             q
           }
           s/.*/./; q'`
       as_dir=$dirpart/$fdir; as_fn_mkdir_p
       # echo "creating $dirpart/$file"
       echo '# dummy' > "$dirpart/$file"
     done
   done
 }
  ;;
     "libtool":C)
 
     # See if we are running on zsh, and set the options which allow our
     # commands through without removal of \ escapes.
     if test -n "${ZSH_VERSION+set}" ; then
       setopt NO_GLOB_SUBST
     fi
 
     cfgfile="${ofile}T"
     trap "$RM \"$cfgfile\"; exit 1" 1 2 15
     $RM "$cfgfile"
 
     cat <<_LT_EOF >> "$cfgfile"
 #! $SHELL
 
 # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
 # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
 # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 #
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
 #                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
 #                 Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 #   This file is part of GNU Libtool.
 #
 # GNU Libtool is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License as
 # published by the Free Software Foundation; either version 2 of
 # the License, or (at your option) any later version.
 #
 # As a special exception to the GNU General Public License,
 # if you distribute this file as part of a program or library that
 # is built using GNU Libtool, you may include this file under the
 # same distribution terms that you use for the rest of that program.
 #
 # GNU Libtool is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
 # along with GNU Libtool; see the file COPYING.  If not, a copy
 # can be downloaded from http://www.gnu.org/licenses/gpl.html, or
 # obtained by writing to the Free Software Foundation, Inc.,
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 
 
 # The names of the tagged configurations supported by this script.
 available_tags="CXX "
 
 # ### BEGIN LIBTOOL CONFIG
 
 # Whether or not to build static libraries.
 build_old_libs=$enable_static
 
 # Which release of libtool.m4 was used?
 macro_version=$macro_version
 macro_revision=$macro_revision
 
 # Whether or not to build shared libraries.
 build_libtool_libs=$enable_shared
 
 # What type of objects to build.
 pic_mode=$pic_mode
 
 # Whether or not to optimize for fast installation.
 fast_install=$enable_fast_install
 
 # Shell to use when invoking shell scripts.
 SHELL=$lt_SHELL
 
 # An echo program that protects backslashes.
 ECHO=$lt_ECHO
 
 # The PATH separator for the build system.
 PATH_SEPARATOR=$lt_PATH_SEPARATOR
 
 # The host system.
 host_alias=$host_alias
 host=$host
 host_os=$host_os
 
 # The build system.
 build_alias=$build_alias
 build=$build
 build_os=$build_os
 
 # A sed program that does not truncate output.
 SED=$lt_SED
 
 # Sed that helps us avoid accidentally triggering echo(1) options like -n.
 Xsed="\$SED -e 1s/^X//"
 
 # A grep program that handles long lines.
 GREP=$lt_GREP
 
 # An ERE matcher.
 EGREP=$lt_EGREP
 
 # A literal string matcher.
 FGREP=$lt_FGREP
 
 # A BSD- or MS-compatible name lister.
 NM=$lt_NM
 
 # Whether we need soft or hard links.
 LN_S=$lt_LN_S
 
 # What is the maximum length of a command?
 max_cmd_len=$max_cmd_len
 
 # Object file suffix (normally "o").
 objext=$ac_objext
 
 # Executable file suffix (normally "").
 exeext=$exeext
 
 # whether the shell understands "unset".
 lt_unset=$lt_unset
 
 # turn spaces into newlines.
 SP2NL=$lt_lt_SP2NL
 
 # turn newlines into spaces.
 NL2SP=$lt_lt_NL2SP
 
 # convert \$build file names to \$host format.
 to_host_file_cmd=$lt_cv_to_host_file_cmd
 
 # convert \$build files to toolchain format.
 to_tool_file_cmd=$lt_cv_to_tool_file_cmd
 
 # An object symbol dumper.
 OBJDUMP=$lt_OBJDUMP
 
 # Method to check whether dependent libraries are shared objects.
 deplibs_check_method=$lt_deplibs_check_method
 
 # Command to use when deplibs_check_method = "file_magic".
 file_magic_cmd=$lt_file_magic_cmd
 
 # How to find potential files when deplibs_check_method = "file_magic".
 file_magic_glob=$lt_file_magic_glob
 
 # Find potential files using nocaseglob when deplibs_check_method = "file_magic".
 want_nocaseglob=$lt_want_nocaseglob
 
 # DLL creation program.
 DLLTOOL=$lt_DLLTOOL
 
 # Command to associate shared and link libraries.
 sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
 
 # The archiver.
 AR=$lt_AR
 
 # Flags to create an archive.
 AR_FLAGS=$lt_AR_FLAGS
 
 # How to feed a file listing to the archiver.
 archiver_list_spec=$lt_archiver_list_spec
 
 # A symbol stripping program.
 STRIP=$lt_STRIP
 
 # Commands used to install an old-style archive.
 RANLIB=$lt_RANLIB
 old_postinstall_cmds=$lt_old_postinstall_cmds
 old_postuninstall_cmds=$lt_old_postuninstall_cmds
 
 # Whether to use a lock for old archive extraction.
 lock_old_archive_extraction=$lock_old_archive_extraction
 
 # A C compiler.
 LTCC=$lt_CC
 
 # LTCC compiler flags.
 LTCFLAGS=$lt_CFLAGS
 
 # Take the output of nm and produce a listing of raw symbols and C names.
 global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
 
 # Transform the output of nm in a proper C declaration.
 global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 
 # Transform the output of nm in a C name address pair.
 global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
 # Transform the output of nm in a C name address pair when lib prefix is needed.
 global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
 
 # Specify filename containing input files for \$NM.
 nm_file_list_spec=$lt_nm_file_list_spec
 
 # The root where to search for dependent libraries,and in which our libraries should be installed.
 lt_sysroot=$lt_sysroot
 
 # The name of the directory that contains temporary libtool files.
 objdir=$objdir
 
 # Used to examine libraries when file_magic_cmd begins with "file".
 MAGIC_CMD=$MAGIC_CMD
 
 # Must we lock files when doing compilation?
 need_locks=$lt_need_locks
 
 # Manifest tool.
 MANIFEST_TOOL=$lt_MANIFEST_TOOL
 
 # Tool to manipulate archived DWARF debug symbol files on Mac OS X.
 DSYMUTIL=$lt_DSYMUTIL
 
 # Tool to change global to local symbols on Mac OS X.
 NMEDIT=$lt_NMEDIT
 
 # Tool to manipulate fat objects and archives on Mac OS X.
 LIPO=$lt_LIPO
 
 # ldd/readelf like tool for Mach-O binaries on Mac OS X.
 OTOOL=$lt_OTOOL
 
 # ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
 OTOOL64=$lt_OTOOL64
 
 # Old archive suffix (normally "a").
 libext=$libext
 
 # Shared library suffix (normally ".so").
 shrext_cmds=$lt_shrext_cmds
 
 # The commands to extract the exported symbol list from a shared archive.
 extract_expsyms_cmds=$lt_extract_expsyms_cmds
 
 # Variables whose values should be saved in libtool wrapper scripts and
 # restored at link time.
 variables_saved_for_relink=$lt_variables_saved_for_relink
 
 # Do we need the "lib" prefix for modules?
 need_lib_prefix=$need_lib_prefix
 
 # Do we need a version for libraries?
 need_version=$need_version
 
 # Library versioning type.
 version_type=$version_type
 
 # Shared library runtime path variable.
 runpath_var=$runpath_var
 
 # Shared library path variable.
 shlibpath_var=$shlibpath_var
 
 # Is shlibpath searched before the hard-coded library search path?
 shlibpath_overrides_runpath=$shlibpath_overrides_runpath
 
 # Format of library name prefix.
 libname_spec=$lt_libname_spec
 
 # List of archive names.  First name is the real one, the rest are links.
 # The last name is the one that the linker finds with -lNAME
 library_names_spec=$lt_library_names_spec
 
 # The coded name of the library, if different from the real name.
 soname_spec=$lt_soname_spec
 
 # Permission mode override for installation of shared libraries.
 install_override_mode=$lt_install_override_mode
 
 # Command to use after installation of a shared archive.
 postinstall_cmds=$lt_postinstall_cmds
 
 # Command to use after uninstallation of a shared archive.
 postuninstall_cmds=$lt_postuninstall_cmds
 
 # Commands used to finish a libtool library installation in a directory.
 finish_cmds=$lt_finish_cmds
 
 # As "finish_cmds", except a single script fragment to be evaled but
 # not shown.
 finish_eval=$lt_finish_eval
 
 # Whether we should hardcode library paths into libraries.
 hardcode_into_libs=$hardcode_into_libs
 
 # Compile-time system search path for libraries.
 sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
 # Run-time system search path for libraries.
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
 # Whether dlopen is supported.
 dlopen_support=$enable_dlopen
 
 # Whether dlopen of programs is supported.
 dlopen_self=$enable_dlopen_self
 
 # Whether dlopen of statically linked programs is supported.
 dlopen_self_static=$enable_dlopen_self_static
 
 # Commands to strip libraries.
 old_striplib=$lt_old_striplib
 striplib=$lt_striplib
 
 
 # The linker used to build libraries.
 LD=$lt_LD
 
 # How to create reloadable object files.
 reload_flag=$lt_reload_flag
 reload_cmds=$lt_reload_cmds
 
 # Commands used to build an old-style archive.
 old_archive_cmds=$lt_old_archive_cmds
 
 # A language specific compiler.
 CC=$lt_compiler
 
 # Is the compiler the GNU compiler?
 with_gcc=$GCC
 
 # Compiler flag to turn off builtin functions.
 no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
 
 # Additional compiler flags for building library objects.
 pic_flag=$lt_lt_prog_compiler_pic
 
 # How to pass a linker flag through the compiler.
 wl=$lt_lt_prog_compiler_wl
 
 # Compiler flag to prevent dynamic linking.
 link_static_flag=$lt_lt_prog_compiler_static
 
 # Does compiler simultaneously support -c and -o options?
 compiler_c_o=$lt_lt_cv_prog_compiler_c_o
 
 # Whether or not to add -lc for building shared libraries.
 build_libtool_need_lc=$archive_cmds_need_lc
 
 # Whether or not to disallow shared libs when runtime libs are static.
 allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
 
 # Compiler flag to allow reflexive dlopens.
 export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
 
 # Compiler flag to generate shared objects directly from archives.
 whole_archive_flag_spec=$lt_whole_archive_flag_spec
 
 # Whether the compiler copes with passing no objects directly.
 compiler_needs_object=$lt_compiler_needs_object
 
 # Create an old-style archive from a shared archive.
 old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
 
 # Create a temporary old-style archive to link instead of a shared archive.
 old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
 
 # Commands used to build a shared archive.
 archive_cmds=$lt_archive_cmds
 archive_expsym_cmds=$lt_archive_expsym_cmds
 
 # Commands used to build a loadable module if different from building
 # a shared archive.
 module_cmds=$lt_module_cmds
 module_expsym_cmds=$lt_module_expsym_cmds
 
 # Whether we are building with GNU ld or not.
 with_gnu_ld=$lt_with_gnu_ld
 
 # Flag that allows shared libraries with undefined symbols to be built.
 allow_undefined_flag=$lt_allow_undefined_flag
 
 # Flag that enforces no undefined symbols.
 no_undefined_flag=$lt_no_undefined_flag
 
 # Flag to hardcode \$libdir into a binary during linking.
 # This must work even if \$libdir does not exist
 hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
 
 # Whether we need a single "-rpath" flag with a separated argument.
 hardcode_libdir_separator=$lt_hardcode_libdir_separator
 
 # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
 # DIR into the resulting binary.
 hardcode_direct=$hardcode_direct
 
 # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
 # DIR into the resulting binary and the resulting library dependency is
 # "absolute",i.e impossible to change by setting \${shlibpath_var} if the
 # library is relocated.
 hardcode_direct_absolute=$hardcode_direct_absolute
 
 # Set to "yes" if using the -LDIR flag during linking hardcodes DIR
 # into the resulting binary.
 hardcode_minus_L=$hardcode_minus_L
 
 # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
 # into the resulting binary.
 hardcode_shlibpath_var=$hardcode_shlibpath_var
 
 # Set to "yes" if building a shared library automatically hardcodes DIR
 # into the library and all subsequent libraries and executables linked
 # against it.
 hardcode_automatic=$hardcode_automatic
 
 # Set to yes if linker adds runtime paths of dependent libraries
 # to runtime path list.
 inherit_rpath=$inherit_rpath
 
 # Whether libtool must link a program against all its dependency libraries.
 link_all_deplibs=$link_all_deplibs
 
 # Set to "yes" if exported symbols are required.
 always_export_symbols=$always_export_symbols
 
 # The commands to list exported symbols.
 export_symbols_cmds=$lt_export_symbols_cmds
 
 # Symbols that should not be listed in the preloaded symbols.
 exclude_expsyms=$lt_exclude_expsyms
 
 # Symbols that must always be exported.
 include_expsyms=$lt_include_expsyms
 
 # Commands necessary for linking programs (against libraries) with templates.
 prelink_cmds=$lt_prelink_cmds
 
 # Commands necessary for finishing linking programs.
 postlink_cmds=$lt_postlink_cmds
 
 # Specify filename containing input files.
 file_list_spec=$lt_file_list_spec
 
 # How to hardcode a shared library path into an executable.
 hardcode_action=$hardcode_action
 
 # The directories searched by this compiler when creating a shared library.
 compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
 
 # Dependencies to place before and after the objects being linked to
 # create a shared library.
 predep_objects=$lt_predep_objects
 postdep_objects=$lt_postdep_objects
 predeps=$lt_predeps
 postdeps=$lt_postdeps
 
 # The library search path used internally by the compiler when linking
 # a shared library.
 compiler_lib_search_path=$lt_compiler_lib_search_path
 
 # ### END LIBTOOL CONFIG
 
 _LT_EOF
 
   case $host_os in
   aix3*)
     cat <<\_LT_EOF >> "$cfgfile"
 # AIX sometimes has problems with the GCC collect2 program.  For some
 # reason, if we set the COLLECT_NAMES environment variable, the problems
 # vanish in a puff of smoke.
 if test "X${COLLECT_NAMES+set}" != Xset; then
   COLLECT_NAMES=
   export COLLECT_NAMES
 fi
 _LT_EOF
     ;;
   esac
 
 
 ltmain="$ac_aux_dir/ltmain.sh"
 
 
   # We use sed instead of cat because bash on DJGPP gets confused if
   # if finds mixed CR/LF and LF-only lines.  Since sed operates in
   # text mode, it properly converts lines to CR/LF.  This bash problem
   # is reportedly fixed, but why not run on old versions too?
   sed '$q' "$ltmain" >> "$cfgfile" \
      || (rm -f "$cfgfile"; exit 1)
 
   if test x"$xsi_shell" = xyes; then
   sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
 func_dirname ()\
 {\
 \    case ${1} in\
 \      */*) func_dirname_result="${1%/*}${2}" ;;\
 \      *  ) func_dirname_result="${3}" ;;\
 \    esac\
 } # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
   && mv -f "$cfgfile.tmp" "$cfgfile" \
     || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
 test 0 -eq $? || _lt_function_replace_fail=:
 
 
   sed -e '/^func_basename ()$/,/^} # func_basename /c\
 func_basename ()\
 {\
 \    func_basename_result="${1##*/}"\
 } # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
   && mv -f "$cfgfile.tmp" "$cfgfile" \
     || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
 test 0 -eq $? || _lt_function_replace_fail=:
 
 
   sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
 func_dirname_and_basename ()\
 {\
 \    case ${1} in\
 \      */*) func_dirname_result="${1%/*}${2}" ;;\
 \      *  ) func_dirname_result="${3}" ;;\
 \    esac\
 \    func_basename_result="${1##*/}"\
 } # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
   && mv -f "$cfgfile.tmp" "$cfgfile" \
     || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
 test 0 -eq $? || _lt_function_replace_fail=:
 
 
   sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
 func_stripname ()\
 {\
 \    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
 \    # positional parameters, so assign one to ordinary parameter first.\
 \    func_stripname_result=${3}\
 \    func_stripname_result=${func_stripname_result#"${1}"}\
 \    func_stripname_result=${func_stripname_result%"${2}"}\
 } # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
   && mv -f "$cfgfile.tmp" "$cfgfile" \
     || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
 test 0 -eq $? || _lt_function_replace_fail=:
 
 
   sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
 func_split_long_opt ()\
 {\
 \    func_split_long_opt_name=${1%%=*}\
 \    func_split_long_opt_arg=${1#*=}\
 } # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
   && mv -f "$cfgfile.tmp" "$cfgfile" \
     || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
 test 0 -eq $? || _lt_function_replace_fail=:
 
 
   sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
 func_split_short_opt ()\
 {\
 \    func_split_short_opt_arg=${1#??}\
 \    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
 } # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
   && mv -f "$cfgfile.tmp" "$cfgfile" \
     || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
 test 0 -eq $? || _lt_function_replace_fail=:
 
 
   sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
 func_lo2o ()\
 {\
 \    case ${1} in\
 \      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
 \      *)    func_lo2o_result=${1} ;;\
 \    esac\
 } # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
   && mv -f "$cfgfile.tmp" "$cfgfile" \
     || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
 test 0 -eq $? || _lt_function_replace_fail=:
 
 
   sed -e '/^func_xform ()$/,/^} # func_xform /c\
 func_xform ()\
 {\
     func_xform_result=${1%.*}.lo\
 } # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
   && mv -f "$cfgfile.tmp" "$cfgfile" \
     || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
 test 0 -eq $? || _lt_function_replace_fail=:
 
 
   sed -e '/^func_arith ()$/,/^} # func_arith /c\
 func_arith ()\
 {\
     func_arith_result=$(( $* ))\
 } # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
   && mv -f "$cfgfile.tmp" "$cfgfile" \
     || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
 test 0 -eq $? || _lt_function_replace_fail=:
 
 
   sed -e '/^func_len ()$/,/^} # func_len /c\
 func_len ()\
 {\
     func_len_result=${#1}\
 } # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
   && mv -f "$cfgfile.tmp" "$cfgfile" \
     || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
 test 0 -eq $? || _lt_function_replace_fail=:
 
 fi
 
 if test x"$lt_shell_append" = xyes; then
   sed -e '/^func_append ()$/,/^} # func_append /c\
 func_append ()\
 {\
     eval "${1}+=\\${2}"\
 } # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
   && mv -f "$cfgfile.tmp" "$cfgfile" \
     || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
 test 0 -eq $? || _lt_function_replace_fail=:
 
 
   sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
 func_append_quoted ()\
 {\
 \    func_quote_for_eval "${2}"\
 \    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
 } # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
   && mv -f "$cfgfile.tmp" "$cfgfile" \
     || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
 test 0 -eq $? || _lt_function_replace_fail=:
 
 
   # Save a `func_append' function call where possible by direct use of '+='
   sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
     && mv -f "$cfgfile.tmp" "$cfgfile" \
       || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
   test 0 -eq $? || _lt_function_replace_fail=:
 else
   # Save a `func_append' function call even when '+=' is not available
   sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
     && mv -f "$cfgfile.tmp" "$cfgfile" \
       || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
   test 0 -eq $? || _lt_function_replace_fail=:
 fi
 
 if test x"$_lt_function_replace_fail" = x":"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
 $as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
 fi
 
 
    mv -f "$cfgfile" "$ofile" ||
     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
   chmod +x "$ofile"
 
 
     cat <<_LT_EOF >> "$ofile"
 
 # ### BEGIN LIBTOOL TAG CONFIG: CXX
 
 # The linker used to build libraries.
 LD=$lt_LD_CXX
 
 # How to create reloadable object files.
 reload_flag=$lt_reload_flag_CXX
 reload_cmds=$lt_reload_cmds_CXX
 
 # Commands used to build an old-style archive.
 old_archive_cmds=$lt_old_archive_cmds_CXX
 
 # A language specific compiler.
 CC=$lt_compiler_CXX
 
 # Is the compiler the GNU compiler?
 with_gcc=$GCC_CXX
 
 # Compiler flag to turn off builtin functions.
 no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
 
 # Additional compiler flags for building library objects.
 pic_flag=$lt_lt_prog_compiler_pic_CXX
 
 # How to pass a linker flag through the compiler.
 wl=$lt_lt_prog_compiler_wl_CXX
 
 # Compiler flag to prevent dynamic linking.
 link_static_flag=$lt_lt_prog_compiler_static_CXX
 
 # Does compiler simultaneously support -c and -o options?
 compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
 
 # Whether or not to add -lc for building shared libraries.
 build_libtool_need_lc=$archive_cmds_need_lc_CXX
 
 # Whether or not to disallow shared libs when runtime libs are static.
 allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
 
 # Compiler flag to allow reflexive dlopens.
 export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
 
 # Compiler flag to generate shared objects directly from archives.
 whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
 
 # Whether the compiler copes with passing no objects directly.
 compiler_needs_object=$lt_compiler_needs_object_CXX
 
 # Create an old-style archive from a shared archive.
 old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
 
 # Create a temporary old-style archive to link instead of a shared archive.
 old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
 
 # Commands used to build a shared archive.
 archive_cmds=$lt_archive_cmds_CXX
 archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
 
 # Commands used to build a loadable module if different from building
 # a shared archive.
 module_cmds=$lt_module_cmds_CXX
 module_expsym_cmds=$lt_module_expsym_cmds_CXX
 
 # Whether we are building with GNU ld or not.
 with_gnu_ld=$lt_with_gnu_ld_CXX
 
 # Flag that allows shared libraries with undefined symbols to be built.
 allow_undefined_flag=$lt_allow_undefined_flag_CXX
 
 # Flag that enforces no undefined symbols.
 no_undefined_flag=$lt_no_undefined_flag_CXX
 
 # Flag to hardcode \$libdir into a binary during linking.
 # This must work even if \$libdir does not exist
 hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
 
 # Whether we need a single "-rpath" flag with a separated argument.
 hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
 
 # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
 # DIR into the resulting binary.
 hardcode_direct=$hardcode_direct_CXX
 
 # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
 # DIR into the resulting binary and the resulting library dependency is
 # "absolute",i.e impossible to change by setting \${shlibpath_var} if the
 # library is relocated.
 hardcode_direct_absolute=$hardcode_direct_absolute_CXX
 
 # Set to "yes" if using the -LDIR flag during linking hardcodes DIR
 # into the resulting binary.
 hardcode_minus_L=$hardcode_minus_L_CXX
 
 # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
 # into the resulting binary.
 hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
 
 # Set to "yes" if building a shared library automatically hardcodes DIR
 # into the library and all subsequent libraries and executables linked
 # against it.
 hardcode_automatic=$hardcode_automatic_CXX
 
 # Set to yes if linker adds runtime paths of dependent libraries
 # to runtime path list.
 inherit_rpath=$inherit_rpath_CXX
 
 # Whether libtool must link a program against all its dependency libraries.
 link_all_deplibs=$link_all_deplibs_CXX
 
 # Set to "yes" if exported symbols are required.
 always_export_symbols=$always_export_symbols_CXX
 
 # The commands to list exported symbols.
 export_symbols_cmds=$lt_export_symbols_cmds_CXX
 
 # Symbols that should not be listed in the preloaded symbols.
 exclude_expsyms=$lt_exclude_expsyms_CXX
 
 # Symbols that must always be exported.
 include_expsyms=$lt_include_expsyms_CXX
 
 # Commands necessary for linking programs (against libraries) with templates.
 prelink_cmds=$lt_prelink_cmds_CXX
 
 # Commands necessary for finishing linking programs.
 postlink_cmds=$lt_postlink_cmds_CXX
 
 # Specify filename containing input files.
 file_list_spec=$lt_file_list_spec_CXX
 
 # How to hardcode a shared library path into an executable.
 hardcode_action=$hardcode_action_CXX
 
 # The directories searched by this compiler when creating a shared library.
 compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
 
 # Dependencies to place before and after the objects being linked to
 # create a shared library.
 predep_objects=$lt_predep_objects_CXX
 postdep_objects=$lt_postdep_objects_CXX
 predeps=$lt_predeps_CXX
 postdeps=$lt_postdeps_CXX
 
 # The library search path used internally by the compiler when linking
 # a shared library.
 compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
 
 # ### END LIBTOOL TAG CONFIG: CXX
 _LT_EOF
 
  ;;
 
   esac
 done # for ac_tag
 
 
 as_fn_exit 0

This page was automatically generated by the 2.3.7 LXR engine. The LXR team