Warning, /analysis/MvtxTelescope/AnaTestbeamV1/notes/notes_for_running.txt is written in an unsupported language. File is not indexed.
0001 -------------------------------------------------------------------------------------------------------------------------
0002 Reference
0003 -------------------------------------------------------------------------------------------------------------------------
0004 id2: Output ON, readbacks 1.799018 V 0.193578 A, OVP OK OCP OK
0005 id3: Output ON, readbacks 1.799018 V 0.190579 A, OVP OK OCP OK
0006 id1: Output ON, readbacks 4.998905 V 1.945789 A, OVP OK OCP OK
0007
0008 -------------------------------------------------------------------------------------------------------------------------
0009 System power on:
0010 -------------------------------------------------------------------------------------------------------------------------
0011 1)Turn on RU fan (top most terminal)
0012 ./e363xa_on.py /dev/ttyUSB_id7
0013 Output ON, readbacks 12.01289 V 2.777201 A, OVP OK OCP OK
0014
0015 2)Turn on RU second )terminal below the fan)
0016 ./e363xa_on.py /dev/ttyUSB_id1
0017 Output ON, readbacks 4.998905 V 1.345789 A, OVP OK OCP OK
0018
0019 3)program RU using Vivado (Vivado is open on the right hand side
0020 Output ON, readbacks 4.998905 V 1.945789 A, OVP OK OCP OK
0021
0022 4)once the proram is complete initlize GBT link using python script
0023 ../../modules/board_support_software/software/py/initGBTx_v1.py ../../modules/gbt/software/GBTx_configs/GBTx0_Config.xml
0024 Output ON, readbacks 4.998905 V 1.945789 A, OVP OK OCP OK
0025
0026 5)Reprogram RU using Vivado
0027 Output ON, readbacks 4.998905 V 1.945789 A, OVP OK OCP OK
0028
0029 6)Initialize readout unit
0030 ./testbench_JS_AT_SU_nopulse.py initialize_boards
0031 Output ON, readbacks 4.998905 V 1.945789 A, OVP OK OCP OK
0032
0033 7)Turn on ALPIDE power supplies
0034 ./e363xa_on.py /dev/ttyUSB_id2
0035 ./e363xa_on.py /dev/ttyUSB_id3
0036 Aproximate current draw
0037 id2: Output ON, readbacks 1.799018 V 0.059578 A, OVP OK OCP OK
0038 id3: Output ON, readbacks 1.799018 V 0.053579 A, OVP OK OCP OK
0039
0040 8)Initialize/configure sensors Readout Unit gt interface
0041 ./testbench_JS_AT_SU_nopulse.py setup_sensors
0042 ./testbench_JS_AT_SU_nopulse.py setup_readout
0043 id2: Output ON, readbacks 1.799018 V 0.193578 A, OVP OK OCP OK
0044 id3: Output ON, readbacks 1.799018 V 0.190579 A, OVP OK OCP OK
0045 Output ON, readbacks 4.998905 V 1.945789 A, OVP OK OCP OK
0046
0047 9) Configure RU arbiter
0048 ../../modules/board_support_software/software/py/wrreg.py 8 29 0xF
0049 Output ON, readbacks 4.998905 V 1.945789 A, OVP OK OCP OK
0050
0051 -------------------------------------------------------------------------------------------------------------------------
0052 Reconfigure ALPIDEs:
0053 -------------------------------------------------------------------------------------------------------------------------
0054 1) Power down ALPIDEs
0055 ./e363xa_off.py /dev/ttyUSB_id2
0056 ./e363xa_off.py /dev/ttyUSB_id3
0057
0058 2)Disable clock from ALPIDE
0059 ./testbench_JS_AT_SU_nopulse.py disable_clock
0060 id2: Output ON, readbacks 1.799018 V 0.059578 A, OVP OK OCP OK
0061 id3: Output ON, readbacks 1.799018 V 0.053579 A, OVP OK OCP OK
0062
0063 3)Initialize/configure sensors Readout Unit gt interface
0064 ./testbench_JS_AT_SU_nopulse.py setup_sensors
0065 ./testbench_JS_AT_SU_nopulse.py setup_readout
0066 id2: Output ON, readbacks 1.799018 V 0.193578 A, OVP OK OCP OK
0067 id3: Output ON, readbacks 1.799018 V 0.190579 A, OVP OK OCP OK
0068
0069 -------------------------------------------------------------------------------------------------------------------------
0070 Periodically run
0071 -------------------------------------------------------------------------------------------------------------------------
0072 ./testbench_JS_AT_SU_nopulse.py refresh_pixels
0073 -------------------------------------------------------------------------------------------------------------------------
0074 49,1 41%
0075
